P0410: Secondary Air Injection System
Updated November 12, 2026
Some engines pump fresh air into the exhaust for the first minute or two after a cold start to help the catalytic converter warm up quickly. P0410 means the computer didn't see the expected result when that system ran.
COMPZA may earn a commission when you buy through links on this page, at no extra cost to you. How we make money.
🔧 Want to check this yourself? An OBD2 scanner reads the code; models with live data also show the sensor readings used in the checks below. See code readers and scanners from $24.99 ↓ · Which scanner do I need?
Common causes
- A failed secondary air pump (often from water getting inside)
- A stuck or leaking check valve or combination valve
- A blown fuse or failed relay for the air pump
- Cracked hoses or clogged passages
Code meanings can vary slightly by manufacturer. Use these as a starting point and confirm with your vehicle's service information or a mechanic before replacing parts.
Symptoms
- Check engine light
- A loud whine or no sound from the air pump after a cold start
- Failed emissions inspection
- Usually no change in how the car drives
Is it safe to drive?
Usually safe to drive. It's mainly an emissions system, but it should be repaired to pass inspection.
How to check it with a scanner
- Plug an OBD2 scanner into the port under the dashboard and read all stored codes and the freeze-frame data (the conditions when the code set).
- On a cold start, listen for the air pump running for about a minute, then stopping.
- Check the air pump fuse and relay.
- Inspect hoses and the check valve; moisture or exhaust residue in the hose suggests a failed check valve.
- After a repair, clear the code and drive normally for a few days to confirm it doesn't come back.
A basic code reader shows the code; scanners with live data let you watch sensor readings, which is what you need for most of the checks above. See OBD2 scanners under $100.
Code readers and scanners in stock
From partner stores' live product feeds. Check that the tool covers your vehicle's make, model and year on the retailer's page before you buy.
LAUNCH CR319 OBD2 Code Reader & Emissions Readiness Tester$24.99at LAUNCH X431 Online 
LAUNCH CR529 OBD2 Code Reader with Live Data Stream$45at LAUNCH X431 Online 
Autel MaxiLink ML529$52at AUTELOnline 
AutoLink AL319$59at AUTELOnline 
MaxiAP AP2500E$60at AUTELOnline 
LAUNCH Creader VII+ Code Reader for Engine, ABS, SRS & Transmission$119at LAUNCH X431 Online Affiliate links. AUTELOnline prices updated Nov 14, 5:26 PM EST · LAUNCH X431 Online prices updated Nov 14, 4:18 PM EST.
Search eBay for your vehicle
Affiliate links: COMPZA may earn a commission from qualifying eBay purchases at no extra cost to you. Add your vehicle in eBay's parts finder to see parts that fit.
Questions
What does P0410 mean?
P0410 is the generic OBD2 code for "Secondary Air Injection System." Some engines pump fresh air into the exhaust for the first minute or two after a cold start to help the catalytic converter warm up quickly. P0410 means the computer didn't see the expected result when that system ran.
Is it safe to drive with P0410?
Usually safe to drive. It's mainly an emissions system, but it should be repaired to pass inspection.
How do I check P0410 myself?
Read the code and freeze-frame data with an OBD2 scanner, then: On a cold start, listen for the air pump running for about a minute, then stopping. Check the air pump fuse and relay. Inspect hoses and the check valve; moisture or exhaust residue in the hose suggests a failed check valve.
Related codes
📬 Get the weekly deals email
One email a week with the best current deals from our partner stores: home, kitchen, tech, car and gifts. No spam, unsubscribe anytime.
Emails include affiliate links; COMPZA may earn a commission at no extra cost to you. See our privacy policy.