P0715: Input/Turbine Speed Sensor A Circuit
Updated November 13, 2026
The input (turbine) speed sensor tells the transmission computer how fast the transmission's input shaft is turning. It uses this with the output speed to control shifts and the torque converter clutch. P0715 means the signal is missing or electrically faulty, and many transmissions go into a fail-safe mode with limited gears.
COMPZA may earn a commission when you buy through links on this page, at no extra cost to you. How we make money.
🔧 Want to check this yourself? An OBD2 scanner reads the code; models with live data also show the sensor readings used in the checks below. See code readers and scanners from $24.99 ↓ · Which scanner do I need?
Common causes
- A failed input/turbine speed sensor
- Damaged wiring or a loose, corroded or fluid-soaked connector at the sensor or transmission
- Metal debris on a magnetic sensor tip
- A transmission control module fault (less common)
Code meanings can vary slightly by manufacturer. Use these as a starting point and confirm with your vehicle's service information or a mechanic before replacing parts.
Symptoms
- Check engine or transmission warning light
- Harsh, delayed or erratic shifting
- Transmission stuck in one gear (limp mode)
Is it safe to drive?
If the transmission is stuck in one gear, slipping, or shifting so harshly that the car won't accelerate properly, stop driving and have it towed. If it shifts normally with a steady light, drive gently and get it checked soon.
How to check it with a scanner
- Plug an OBD2 scanner into the port under the dashboard and read all stored codes and the freeze-frame data (the conditions when the code set).
- Scan the transmission module for other codes, especially output speed sensor and gear ratio codes.
- Check the transmission fluid level and condition using your vehicle's procedure; some must be checked warm with the engine running, so keep hands clear of the belts and fan.
- With the engine off, inspect the sensor connector and wiring for damage, corrosion or fluid inside the connector.
- If you remove the sensor, check the tip for metal debris, which can also be a sign of internal wear.
- After a repair, clear the code and drive normally for a few days to confirm it doesn't come back.
A basic code reader shows the code; scanners with live data let you watch sensor readings, which is what you need for most of the checks above. See OBD2 scanners under $100.
Code readers and scanners in stock
From partner stores' live product feeds. Check that the tool covers your vehicle's make, model and year on the retailer's page before you buy.
LAUNCH CR319 OBD2 Code Reader & Emissions Readiness Tester$24.99at LAUNCH X431 Online 
LAUNCH CR529 OBD2 Code Reader with Live Data Stream$45at LAUNCH X431 Online 
Autel MaxiLink ML529$52at AUTELOnline 
AutoLink AL319$59at AUTELOnline 
MaxiAP AP2500E$60at AUTELOnline 
LAUNCH Creader VII+ Code Reader for Engine, ABS, SRS & Transmission$119at LAUNCH X431 Online Affiliate links. AUTELOnline prices updated Nov 15, 2:29 AM EST · LAUNCH X431 Online prices updated Nov 15, 12:27 AM EST.
Search eBay for your vehicle
Affiliate links: COMPZA may earn a commission from qualifying eBay purchases at no extra cost to you. Add your vehicle in eBay's parts finder to see parts that fit.
Questions
What does P0715 mean?
P0715 is the generic OBD2 code for "Input/Turbine Speed Sensor A Circuit." The input (turbine) speed sensor tells the transmission computer how fast the transmission's input shaft is turning. It uses this with the output speed to control shifts and the torque converter clutch. P0715 means the signal is missing or electrically faulty, and many transmissions go into a fail-safe mode with limited gears.
Is it safe to drive with P0715?
If the transmission is stuck in one gear, slipping, or shifting so harshly that the car won't accelerate properly, stop driving and have it towed. If it shifts normally with a steady light, drive gently and get it checked soon.
How do I check P0715 myself?
Read the code and freeze-frame data with an OBD2 scanner, then: Scan the transmission module for other codes, especially output speed sensor and gear ratio codes. Check the transmission fluid level and condition using your vehicle's procedure; some must be checked warm with the engine running, so keep hands clear of the belts and fan. With the engine off, inspect the sensor connector and wiring for damage, corrosion or fluid inside the connector. If you remove the sensor, check the tip for metal debris, which can also be a sign of internal wear.
Related codes
📬 Get the weekly deals email
One email a week with the best current deals from our partner stores: home, kitchen, tech, car and gifts. No spam, unsubscribe anytime.
Emails include affiliate links; COMPZA may earn a commission at no extra cost to you. See our privacy policy.